Journals
published
Short-range ordered aluminum foams
Advanced Engineering Materials 2100795 (2021) [9 pages] - [R]
Wiley-VCH, ISSN: 1438-1656 — doi: 10.1002/adem.202100795 — journal link
article
Influence of gas pressure and blowing agent content on the formation of aluminium alloy foam
Advanced Engineering Materials, 2100242 (2021) - [R]
Wiley-VCH, ISSN: 1438-1656 — doi: https://doi.org/10.1002/adem.202100242 — journal link
article
Aluminium foam with sub-mm sized cells produced using a rotating gas injector
Materials Science and Engineering B 273, 115427 (2021) - [R]
Elsevier, ISSN: 0921-5107 — doi: 10.1016/j.mseb.2021.115427 — journal link
article
Nucleation and growth of gas bubbles in AlSi8Mg4 foam investigated by X-ray tomoscopy
Acta Materialia 206, 116583 (2021) - [R]
Elsevier, ISSN: 1359-6454 — doi: 10.1016/j.actamat.2020.116583 — journal link
preprint article
Correlation between foam structure and mechanical performance of aluminium foam sandwich panels
Materials Science and Engineering A 800, 140260 (2021) [11 pages] - [I]
Elsevier, ISSN: 0921-5093 — doi: 10.1016/j.msea.2020.140260 — journal link
preprint article
Motion of liquid and stabilising particles in individual liquid aluminium alloy films
Journal of Materials Science 55, 14125–14136 (2020) - [R]
Springer Nature, ISSN: 1573-4803 and 0022-2461 — doi: 10.1007/s10853-020-05007-5 — journal link
article
The influence of alloy composition and liquid phase on foaming of Al-Si-Mg alloys
Metals 10, 189 (2020) - [I]
MDPI, ISSN: 2075-4701 — doi: 10.3390/met10020189 — journal link
article
Using X-ray tomoscopy to explore the dynamics of foaming metal
Nature Communications 10, 3762 (2019) - [R]
Springer Nature, ISSN 2041-1723 — doi: 10.1038/s41467-019-11521-1 — journal link
article
Simultaneous X-ray radioscopy/tomography and energy-dispersive diffraction applied to liquid aluminium alloy foams
Journal of Synchrotron Radiation 25, 1790–1796 (2018) - [R]
International Union of Crystallography, ISSN: 0909-0495 — doi: 10.1107/S1600577518011657 — journal link
article
Time-resolved in-situ tomography for the analysis of evolving metal foam granulates
Journal of Synchrotron Radiation 25, 1505–1508 (2018) - [R]
International Union of Crystallography, ISSN: 0909-0495 — doi: 10.1107/S1600577518008949 — journal link
article
Particle size and concentration required to stabilise Al foams created by gas injection
Scripta Materialia 153, 54–58 (2018) - [R]
Elsevier, ISSN:1359-6462 — doi: 10.1016/j.scriptamat.2018.04.041 — journal link
article preprint
In situ X-ray tomography of aqueous foams: Analysis of columnar foam generation
Colloids and Surfaces A: Physicochemical and Engineering Aspects 534, 78– 84 (2017) - [R]
Elsevier, ISSN: 0927-7757 — doi: j.colsurfa.2017.03.011 — journal link
article preprint
Elastic and failure response of imperfect three-dimensional metallic lattices: the role of geometric defects induced by Selective Laser Melting
Journal of the Mechanics and Physics of Solids 107, 160–184 (2017) - [R]
Elsevier, ISSN: 0022-5096 — doi: 10.1016/j.jmps.2017.07.003 — journal link
article preprint
Fast synchrotron X-ray tomography of dynamic processes in liquid Al foams
9th International Conference on Porous Metals and Metallic Foams (MetFoam2015), Barcelona (Spain), 31 August - 02 September 2011
Advanced Engineering Materials 19(11), 1600550 (2017) - [C]
Wiley-VCH, ISSN: 1438-1656 — doi: 10.1002/adem.201600550 — journal link
article
Stability of various particle-stabilised aluminium alloys foams made by gas injection
Journal of Materials Science 52(11), 6401–6414 (2017) - [R]
Springer, ISSN: 0022-2461 (Print) 1573-4803 (Online) — doi: 10.1007/s10853-017-0874-3 — journal link
article preprint
Influence of the heating rate on the foaming behaviour of aluminium alloys
Metals 7, 323, (2017) - [C]
MDPI, ISSN: 2075-4701 — doi: 10.3390/met7090323 — journal link
article
Coalescence avalanches in liquid aluminium foams
Metals 7(8), 298 (2017) - [C]
MDPI, ISSN: 2075-4701 — doi: 10.3390/met7080298 — journal link
article
Microstructural porosity in aluminium foams
Acta Materialia 131, 156–168 (2017) - [R]
Elsevier, ISSN: 1359-6454 — doi: 10.1016/j.actamat.2017.03.039 — journal link
article preprint supplement
Effect of magnesium addition on the cell structure of the foams produced from re-melted aluminium alloy scrap
Metallurgical and Materials Transactions A 48(5), 2551–2563 (2017) - [R]
Springer, ISSN: 1073-5623 — doi: 10.1007/s11663-017-1043-4 — journal link
article preprint
Stabilisation of aluminium foams and films by the joint action of dispersed particles and oxide films
Acta Materialia 99, 313–324 (2015) - [R]
Elsevier, ISSN: 1359-6454 — doi: 10.1016/j.actamat.2015.07.064 — journal link
article preprint
Sub-mm sized bubbles injected into metallic melts
Colloids and Surfaces A: Physicochemical and Engineering Aspects 473, 60–67 (2015) - [R]
Elsevier, ISSN: 0927-7757 — doi: j.colsurfa.2014.12.038 — journal link — P
article preprint
An experimental study of columnar crystals using monodisperse microbubbles
Colloids and Surfaces A: Physicochemical and Engineering Aspects 473, 55–59 (2015) - [R]
Elsevier, ISSN: 0927-7757 — doi: 10.1016/j.colsurfa.2014.12.020 — journal link — P
article preprint
The stabilising effect of oxides in foamed aluminium alloy scrap
International Journal of Materials Research 106(9), 978–987 (2015) - [R]
Carl Hanser Verlag, ISSN: 1862-5282 — doi: 10.3139/146.111255 — journal link
article preprint
Pressure-induced foaming of metals
Journal of Metals 67(5), 955–965 (2015) - [R]
Springer, ISSN: 1047-4838 — doi: 10.1007/s11837-015-1331-x — journal link — P
article
The rupture of a single liquid aluminium alloy film
Soft Matter 10(26), 4711–4716 (2014) - [R]
Royal Society of Chemistry, ISSN: 1744-683X — doi: 10.1039/c4sm00487f — journal link — P
article
Analysis of liquid metal foams through X-ray radioscopy and microgravity experiments
Soft Matter 10, 6955–6962 (2014) - [R]
Royal Society of Chemistry, ISSN: 1744-683X — doi: 10.1039/C4SM00467A — journal link — P
article
Article is part of themed collection: 2014 Soft Matter Hot Papers
Drainage of particle-stabilised aluminium composites through single films and Plateau borders
European Conference on Foams, Emulsions and Applications (EUFOAM 2012), 09-12 July 2012, Lisboa, Portugal
Colloids and Surfaces A: Physicochemical and Engineering Aspects 438, 85–92 (2013) - [C]
Elsevier, ISSN: 0927-7757 — doi: 10.1016/j.colsurfa.2013.02.019 — journal link — P78331
article
Foaming of aluminium alloys using multiple precursors
EUFOAM 2012, 8-11 July 2012, Porto (Portugal)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 438, 47–55 (2013) - [C]
Elsevier, ISSN: 0927-7757 — doi: 10.1016/j.colsurfa.2013.02.061 — journal link — P78330
article preprint
White-beam X-ray radioscopy/tomography combined with diffraction
Journal of Synchrotron Radiation 20, 809–810 (2013) - [R]
International Union of Crystallography, ISSN: 0909-0495 — doi: 10.1107/S0909049513018670 — journal link — P75175
article
Suitability of various complex hydrides for foaming aluminium alloys
Journal of Materials Research 28(17), 2436–2443 (2013) - [I]
Materials Research Society, ISSN: 0884-2914 — doi: 10.1557/jmr.2013.110 — journal link — P73455
article
Reduced-pressure foaming of aluminium alloys
Metallurgical and Materials Transactions A 44(1), 419–426 (2013) - [R]
Springer, ISSN: 1073-5623 — doi: 10.1007/s11661-012-1398-8 — journal link — P78095
article preprint
Light-metal foams – history of innovation and technological challenges
7th International Conference on Porous Metals and Metallic Foams (MetFoam2011), 18-21 September 2011, Busan (Korea)
Advanced Engineering Materials 15(3) 82–111 (2013) - [C]
Wiley-VCH, ISSN: 1438-1656 — doi: 10.1002/adem.201200217 — journal link — P78093
article preprint
Foaming of aluminium alloys derived from scrap
7th International Conference on Porous Metals and Metallic Foams (MetFoam2011), 18-21 September 2011, Busan (Korea)
Advanced Engineering Materials 15(3), 129–133 (2013) - [C]
Wiley-VCH, ISSN: 1438-1656 — doi: 10.1002/adem.201200122 — journal link — P78832
article preprint
Metal foaming studied in-situ by energy dispersive X-ray diffraction of synchrotron radiation, X-ray radioscopy and optical expandometry
7th International Conference on Porous Metals and Metallic Foams (MetFoam2011), 18-21 September 2011, Busan (Korea)
Advanced Engineering Materials 15(3), 141–148 (2013) - [C]
Wiley-VCH, ISSN: 1438-1656 — doi: 10.1002/adem.201200183 — journal link — P72901
article preprint
Recent trends in aluminium foam sandwich technology
European Congress and Exhibition on Advanced Materials and Processes (Euromat 2011), 12-15 September 2011, Montpellier, France
Advanced Engineering Materials 14(12), 1082–1087 (2012) - [C]
Wiley-VCH, ISSN: 1438-1656 — doi: 10.1002/adem.201100333 — journal link— P71076
article preprint
Partial decomposition of TiH2 studied in situ by energy dispersive diffraction and ex situ by diffraction microtomography of hard X-ray synchrotron radiation
Scripta Materialia 66(10), 757–760 (2012) - [R]
Elsevier, ISSN:1359-6462 — doi: 10.1016/j.scriptamat.2012.01.057 — journal link — P70711
article preprint
Metal foaming investigated by X-ray radioscopy
Metals 2(1), 10–21 (2012) - [R]
MDPI, ISSN: 2075-4701 — doi: 10.3390/met2010010 — journal link — P70710
article
Structure and deformation correlation of closed-cell aluminium foam subject to uniaxial compression
Acta Materialia 60(8), 3604–3615 (2012) - [R]
Elsevier, ISSN: 1359-6454 — doi: 10.1016/j.actamat.2012.02.029 — journal link— P70702
article preprint
Decomposition of TiH2 studied in-situ by synchrotron X-ray and neutron diffraction
Acta Materialia 59(16), 6318–6330 (2011) - [R]
Elsevier, ISSN: 1359-6454 — doi: 10.1016/j.actamat.2011.06.042 — journal link — P57699
article preprint > supplementary information is available on the journal site
Influence of oxides on the stability of zinc foam
Journal of Materials Science 46(24) 7806-7814 (2011) - [R]
Springer, ISSN: 0022-2461 — doi: 10.1007/s10853-011-5761-8 — journal link — P58375
article preprint
Kinetics of coalescence in liquid aluminium foams
Soft Matter 7(19), 9216–9223 (2011) - [R]
Royal Society of Chemistry, ISSN: 1744-683X — doi: 10.1039/c1sm05831b — journal link — P58376
article
Analysis of the internal structure of a monodisperse liquid foam by X-ray tomography
Soft Matter 7(21), 9881–9885 (2011) - [R]
Royal Society of Chemistry, ISSN: 1744-683X — doi: 10.1039/c1sm05495c — journal link — P57884
article
Foamability of MgAl2O4 (spinel)-reinforced aluminium alloy composites
Metallurgical and Materials Transactions A 42(9), 2898–2908 (2011) - [R]
Springer, ISSN: 1073-5623 — doi: 10.1007/s11661-011-0709-9 — journal link— P57692
article preprint
A study of Mg and Cu additions on the foaming behaviour of Al–Si alloys
Journal of Materials Science 46(15), 5227–5236 (2011) - [R]
Springer, ISSN: 0022-2461 — doi: 10.1007/s10853-011-5460-5 — journal link — P57241
article preprint
Particle-stabilised foams: structure and aging
Soft Matter 7(2), 631–637 (2011) - [R]
Royal Society of Chemistry, ISSN: 1744-683X — doi: 10.1039/c0sm00166j — journal link — P57683
article
Metal foams - towards microcellular materials
International Journal of Materials Research 101(9), 1134–1139 (2010) - [I]
Carl Hanser Verlag, ISSN: 1862-5282 — doi: 10.3139/146.110385 — journal link — P54916
article postprint
Solidification of metal foams
Acta Materialia 58(19), 6358–6370 (2010) - [R]
Elsevier, ISSN: 1359-6454 — doi: 10.1016/j.actamat.2010.07.057 — journal link — P54802
article preprint
The effect of cooling rate on structure and properties of closed-cell aluminium foams
Acta Materialia 58(15), 5031–5042 (2010) - [R]
Elsevier, ISSN: 1359-6454 — doi: 10.1016/j.actamat.2010.05.039 — journal link — P54644
article preprint
Defect generation during solidification of aluminium foams
Scripta Materialia 63(2), 235–238 (2010) - [R]
Elsevier, ISSN: 1359-6462 — doi: 10.1016/j.scriptamat.2010.03.064 — journal link — P54423
article preprint
Al and Zn foams blown by an intrinsic gas source
Advanced Engineering Materials 12(6), 472–477 (2010) - [R]
Wiley-VCH, ISSN: 1438-1656 — doi: 10.1002/adem.201000017 — journal link — P54652
article preprint
Collapse of aluminium foam in two different atmospheres
Metallurgical and Materials Transactions B 41(3), 500–504 (2010) - [R]
Springer, ISSN: 1073-5615 — doi: 10.1007/s11663-010-9357-5 — journal link — P54421
article preprint
Thermographic monitoring of aluminium foaming process
Journal of Nondestructive Evaluation 28(3-4), 141–148 (2009) - [R]
Springer, ISSN: 0195-9298 — doi: 10.1007/s10921-009-0056-6 — journal link — P52043
article preprint
Improvement of aluminium foaming by powder consolidation under vacuum
Scripta Materialia 61(5), 552–555, (2009) - [R]
Elsevier, ISSN: 1359-6462 — doi: 10.1016/j.scriptamat.2009.05.020 — journal link — P51633
article preprint
Strain hardening during constrained deformation of metal foams - effect of shear displacement
Scripta Materialia 61(7), 752–755 (2009) - [R]
Elsevier, ISSN: 1359-6462 — doi: 10.1016/j.scriptamat.2009.06.023 — journal link — P51635
article preprint
Early pore formation in aluminium foams studied with ex-situ synchrotron micro-tomography and 3D image analysis
Acta Materialia 57(16), 4809–4821 (2009) - [R]
Elsevier, ISSN: 1359-6454 — doi: 10.1016/j.actamat.2009.06.045 — journal link — P51268
article preprint
Experiments on metallic foams under gravity and microgravity
7th Eufoam Conference, 08-10 July 2008, Noordwijk, Netherlands
Colloids and Surfaces A: Physicochemical and Engineering Aspects 344(1-3), 101–106 (2009) - [C]
Elsevier, ISSN: 0927-7757 — doi: 10.1016/j.colsurfa.2009.03.010 — journal link— conference link — P46497
article
Imaging of metallic foams using X-ray micro-CT
7th Eufoam Conference, 08-10 July 2008, Noordwijk, Netherlands
Colloids and Surfaces A: Physicochemical and Engineering Aspects 344(1-3), 107–112 (2009) - [C]
Elsevier, ISSN: 0927-7757 — doi: 10.1016/j.colsurfa.2009.01.008 — journal link — conference link — P46478
article
Synchrotron-based radioscopy employing spatio-temporal micro-resolution for studying fast phenomena in liquid metal foams
Journal of Synchrotron Radiation 16(3), 432–434 (2009) - [R]
International Union of Crystallography, ISSN: 0909-0495 — doi: 10.1107/S0909049509001939 — journal link — P46617 — open access
article
Influence of compaction conditions on the foamability of AlSi8Mg4 alloy
Metallurgical and Materials Transactions B 40(5), 755–767 (2009) - [R]
Springer, ISSN: 1073-5615 — doi: 10.1007/s11663-009-9264-9 — journal link— P46637
article
Porous metals and metallic foams: Current status and developments
5th Biennial International Conference on Porous Metals and Metallic Foams, 05-07 September 2007, Montreal, Canada
Advanced Engineering Materials 10(9), 775–787 (2008) - [C]
Wiley-VCH ISSN: 1438-1656 — doi: 10.1002/adem.200800241 — journal link— P39859
article postprint
Aluminium foam sandwich panels: Manufacture, metallurgy and applications
5th Biennial International Conference on Porous Metals and Metallic Foams, 05-07 September 2007, Montreal, Canada
Advanced Engineering Materials 10(9), 793–802 (2008) - [C]
Wiley-VCH, ISSN: 1438-1656 — doi: 10.1002/adem.200800091 — journal link— P39819
article postprint
Structure and distribution of oxides in aluminium foam
Acta Materialia 56(15), 3990–4001 (2008) - [R]
Elsevier, ISSN: 1359-6454 — doi: 10.1016/j.actamat.2008.04.040 — journal link — P17720
article postprint
Fast processes in liquid metal foams investigated by high-speed synchrotron X-ray micro-radioscopy
Applied Physics Letters 92(13), 134104 - 3 pages (2008) (see also: online material) - [R]
American Institute of Physics, ISSN: 0003-6951 — doi: 10.1063/1.2905748 — journal link— P31397
article
also selected for: Virtual Journal of Ultrafast Science 7(5) (2008) published by APS and AIP
Gold and gold alloy foams
Gold Bulletin 41(3), 251–256 (2008) - [R]
World Gold Assiciation, ISSN: 0017-1557 — doi: no such — web of science — journal link— P31801
article
Influence of particle additions on the foaming behaviour of AlSi11/TiH2 composites made by semi-solid processing
Materials Science and Engineering A 480(1-2), 283–288 (2008) - [R]
Elsevier, ISSN: 0921-5093 — doi: 10.1016/j.msea.2007.07.040 — journal link— P17721
article postprint
Fatigue of a laterally-constrained closed cell aluminum foam
Acta Materialia 56(5), 1114–1125 (2008) - [R]
Elsevier, ISSN: 1359-6454 — doi: 10.1016/j.actamat.2007.11.004 — journal link— P23504
article postprint
Foaming of blowing agent-free aluminium powder compacts
6th Eufoam Conference, 02-06 July 2006, Potsdam, Germany
Colloids and Surfaces A: Physicochemical and Engineering Aspects 309(1-3), 264–269 (2007) - [C]
Elsevier, ISSN: 0927-7757 — doi: 10.1016/j.colsurfa.2007.03.017 — journal link— P15877
article
Metal foams - High temperature colloids. Part II: In-situ analysis of metal foams
6th Eufoam Conference, 02-06 July 2006, Potsdam, Germany
Colloids and Surfaces A: Physicochemical and Engineering Aspects 309(1-3), 254–263 (2007) - [C]
Elsevier, ISSN: 0927-7757 — doi: 10.1016/j.colsurfa.2007.02.044 — journal link— P-4590
article
Study on aluminium-based single films
Physical Chemistry and Chemical Physics 9(48), 6415–6425 (2007) - [I]
Royal Society of Chemistry, ISSN: 1463-9076 — doi: 10.1039/b710497a — journal link— P23737
article
Why are metal foams stable?
Applied Physics Letters 89(15), 154102 - 3 pages (2006) - [R]
American Institute of Physics, ISSN: 0003-6951 — doi: 10.1063/1.2357931 — journal link— P15232
article
Metal Foams: Production and Stability
4th International Conference on Porous Metals and Metal Foaming Technology (MetFoam 2005), 21-23 September 2005, Kyoto, Japan
Advanced Engineering Materials 8(9), 781–794 (2006) - [C]
Wiley-VCH, ISSN: 1438-1656 — doi: 10.1002/adem.200600071 — journal link— P15861
article postprint
Modification of titanium hydride for improved aluminium foam manufacture
Acta Materialia 54(7), 1887–1900 (2006) - [R]
Elsevier, ISSN: 1359-6454 — doi: 10.1016/j.actamat.2005.12.012 — journal link— P15233
article postprint
Improvement of aluminium foam technology by tailoring of blowing agent
Scripta Materialia 54(4), 503–508 (2006) - [R]
Elsevier, ISSN: 1359-6462 — doi: 10.1016/j.scriptamat.2005.10.045 — journal link— P14738
article postprint
Lead and lead alloy foams
Acta Materialia 53(18), 4903–4917 (2005) - [R]
Elsevier, ISSN: 1359-6454 — doi: 10.1016/j.actamat.2005.07.007 — journal link— P15400
article postprint
Investigation of pore initiation in metal foams by synchrotron-radiation tomography
Applied Physics Letters 86(23), 231907 - 3 pages (2005) - [R]
American Institute of Physics, ISSN: 0003-6951 — doi: 10.1063/1.1941453 — journal link— P15405
article
X-ray radioscopy of liquid metal foams: influence of heating profile, atmosphere and pressure
5th European Conference on Foams, Emulsions and Applications (EUFOAM 2004), 05-08 July 2004, Marne la Vallee, Champs sur Marne, France
Colloids and Surfaces A: Physicochemical and Engineering Aspects 263(1-3), 290–294 (2005) - [C]
Elsevier, ISSN: 0927-7757 — doi: 10.1016/j.colsurfa.2004.12.044 — journal link— P11741
article preprint
Metal Foams - high temperature colloids. Part I. Ex-situ analysis of metal foams
International Workshop on Bubble and Drop Interfaces , 25-28 April 2004, Genova, Italy
Colloids and Surfaces A: Physicochemical and Engineering Aspects 261(1-3), 123–130 (2005) - [C]
Elsevier, ISSN: 0927-7757 — doi: 10.1016/j.colsurfa.2004.12.030 — journal link— P14575
article
Aluminium foams for lighter vehicles
International Journal of Vehicle Design 37(2-3), 114–125 (2005) - [I]
Inderscience, ISSN: 0143-3369 — doi: 10.1504/IJVD.2005.006640 — journal link— P15406
article
Real-time X-ray radioscopy on metallic foams using a compact micro-focus source
3rd International Conference on Cellular Metals and Metallic Foams, 23-25 July 2003, Berlin, Germany
Advanced Engineering Materials 6(6), 416–420 (2004) - [C]
Wiley-VCH, ISSN: 1438-1656 — doi: 10.1002/adem.200405143 — journal link— P11735
article
The role of oxidation in blowing particle-stabilised aluminium foams
3rd International Conference on Cellular Metals and Metallic Foams, 23-25 July 2003, Berlin, Germany
Advanced Engineering Materials 6(6), 421–428 (2004) - [C]
Wiley-VCH, ISSN: 1438-1656 — doi: 10.1002/adem.200405144 — journal link— P12152
article
Desorption of hydrogen from blowing agents used for foaming metals
Composite Science and Technology 63(16), 2293–2300 (2003) - [I]
Elsevier, ISSN: 0266-3538 — doi: 10.1016/S0266-3538(03)00262-8 — journal link— P9645
article postprint
Metal foams - on the road to real applications
MRS Bulletin 28(4), 290–295 (2003) - [I]
Materials Research Society, ISSN: 0883-7694 — doi: 10.1557/mrs2003.83 — journal link— P-4156
article
Properties of heat-treated aluminium foams
Materials Science and Engineering A 349(1-2), 98–110 (2003) - [R]
Elsevier, ISSN: 0921-5093 — doi: 10.1016/S0921-5093(02)00582-8 — journal link— P-1130 -
article postprint
Stability of metallic foams studied under microgravity
5th Liquid Matter Conference, 14-18 September 2002, Konstanz, Germany
Journal of Physics: Condensed Matter 15(1), S427–S433 (2003) - [C]
Institute of Physics, ISSN: 0953-8984 — doi: 10.1088/0953-8984/15/1/359 — journal link— P9647
article
Material flow in metal foams studied by neutron radioscopy
International Conference on Neutron Scattering, 09-13 September 2001, München, Germany
Applied Physics A 74(Supp 1), S1118–S1120 (2002) - [C]
Springer, ISSN: 0947-8396 — doi: 10.1007/s003390101200 — journal link — P-950
article
USANS investigation of early stages of metal foam formation
International Conference on Neutron Scattering, 09-13 September 2001, München, Germany
Applied Physics A 74(Supp 1), S1136–S1138 (2002) - [C]
Springer, ISSN: 0947-8396 — doi: 10.1007/s003390101205 — journal link
article postprint
Production of metallic foam under low gravity conditions during parabolic flights
Microgravity Science and Technology 13(3), 36–42 (2002) - [R]
ZT Publishing, ISSN: 0938-0108 — doi: 10.1007/BF02872075 — journal link
article preprint
Process control in aluminium foam production using real-time x-ray radioscopy
International Conference on Cellular Metals and Metal Foaming Technology, 18-20 June 2001, Bremen, Germany
Advanced Engineering Materials 4(10), 814–823 (2002) - [C]
Wiley-VCH, ISSN: 1438-1656 — doi: 10.1002/1527-2648(20021014)4:10<814::AID-ADEM814>3.0.CO;2-5 — journal link— P-1139
article postprint
Viewing the early stages of metal foam formation by computed tomography using synchrotron radiation
International Conference on Cellular Metals and Metal Foaming Technology, 18-20 June 2001, Bremen, Germany
Advanced Engineering Materials 4(10), 808-813 (2002) - [C]
Wiley-VCH, ISSN: 1438-1656 — doi: 10.1002/1527-2648(20021014)4:10<808::AID-ADEM808>3.0.CO;2-U — journal link— P-1162
article
Influence of heat treatment on compression fatigue of aluminium foams
Journal of Materials Science 37(16), 3447–3451 (2002) - [R]
Springer, ISSN: 0022-2461 — doi: 10.1023/A:1016506905271 — journal link— P-1231
article postprint
On the road again: metal foams find favor
Physics Today 55(7), 37–42 (2002) - [I]
Comment and reply: Physics Today 56, 12 (2003)
American Institute of Physics, ISSN: 0031-9228 — doi: 10.1063/1.1506749 — web of science — journal link— P-1162
article
Adaption of aluminium foam properties by means of precipitation hardening
8th Conference on Metal Matrix Composites, 26-27 November 2001, London, UK
Materials Science and Technology 18(5), 474–479 (2002) - [C]
Manley Publishing, ISSN: 0267-0836 — doi: 10.1179/026708302225002182 — journal link— P-1129
article postprint
Experimental and numerical analyses of bending of foam-filled sections
Acta Mechanica 148(1-4), 199–213 (2001) - [R]
Springer, ISSN: 0001-5970 — doi: 10.1007/BF01183678 — journal link
article
Investigation of metal foam formation by microscopy and ultra small-angle neutron scattering
Acta Materialia 49(17), 3409–3420 (2001) - [R]
Elsevier, ISSN: 1359-6454 — doi: 10.1016/S1359-6454(01)00256-7 — journal link— P
article postprint
Manufacture, characterisation and application of cellular metals and metallic foams
Progress in Materials Science 46(6), 559–632 (2001) - [R]
Elsevier, ISSN: 0079-6425 — doi: 10.1016/S0079-6425(00)00002-5 — journal link— P
article (contains a correction) Translation into Russian language
Real-time X-ray investigation of Aluminium Foam Sandwich production
Advanced Engineering Materials 3(6), 407–411 (2001) - [R]
Wiley-VCH, ISSN: 1438-1656 — doi: 10.1002/1527-2648(200106) — journal link
article postprint
Metal foam evolution studied by synchrotron radioscopy
Applied Physics Letters 78(8), 1152–1154 (2001) - [R]
American Institute of Physics, ISSN: 0168-9002 — doi: 10.1063/1.1350422 — journal link
article
Study on nonlinear damping properties of foamed Al
Philosophical Magazine A 80(5), 1085–1092 (2000) - [R]
Taylor & Francis, ISSN: 0141-8610 — doi: 10.1080/01418610008212102 — journal link
article
Manufacturing routes for metal foams
Journal of Metals 52(12), 22–27 (2000) - [I] (HTML-Version)
Metallurgy and Materials Science Research Institute, ISSN: 1047-4838 — doi: 10.1007/s11837-000-0062-8 — journal link
article
Ultra-light-weight aluminum foam for automotive applications
International Journal of Powder Metallurgy 36(6), 61–73 (2000) - [R]
American Powder Metallurgy Institute, ISSN: 0888-7462 — doi: no such — web of science — journal link
article
Eigenschaften und Anwendungsgebiete offenporiger metallischer Werkstoffe
Symposium on Metal Foams, 28-29 February 2000, Vienna, Austria
Materialwissenschaft und Werkstofftechnik 31(6), 501–504 (2000) - [C]
Wiley-VCH, ISSN: 0933-5137 — doi: 10.1002/1521-4052(200006)31:6<501::aid-mawe501>3.0.CO;2-F — journal link
article postprint
Einfluss von Wärmebehandlungen auf Gefüge und Festigkeitseigenschaften von Aluminiumschäumen
Symposium on Metal Foams, 28-29 February 2000, Vienna, Austria
Materialwissenschaft und Werkstofftechnik 31(6), 474–477 (2000) - [C]
Wiley-VCH, ISSN: 0933-5137 — doi: 10.1002/1521-4052(200006)31:6<474::aid-mawe474>3.0.CO;2-G — journal link
article
Der Schäumprozess von Aluminium
Symposium on Metal Foams, 28-29 February 2000, Vienna, Austria
Materialwissenschaft und Werkstofftechnik 31(6), 409–411 (2000) - [C]
Wiley-VCH, ISSN: 0933-5137 — doi: 10.1002/1521-4052(200006)31:6<501::aid-mawe501>3.0.CO;2-F — journal link
article postprint
Cost-effective production techniques for the manufacture of aluminium foam
Aluminium 76(6), 491–496 (2000) - [R]
Aluminium-Verlag Düsseldorf, ISSN: 0002-6689 — doi: no such — journal link
article
A study of aluminium foam formation-kinetics and microstructure
Acta Materialia 48(9), 2349–2362 (2000) - [R]
Elsevier, ISSN: 1359-6454 — doi: 10.1016/S1359-6454(00)00020-3 — journal link
article postprint
Bending crush resistance of partially foam-filled sections
1st International Conference on Metal Foams and Porous Metal Structures, 14-16 June 1999, Bremen, Germany
Advanced Engineering Materials 2(4), 223–227 (2000) - [C]
Wiley-VCH, ISSN: 1438-1656 — doi: 10.1002/(SICI)1527-2648(200004)2:4<223::AID-ADEM223>3.0.CO;2-J — journal link
article
Industrialisation of powder compact foaming process
1st International Conference on Metal Foams and Porous Metal Structures, 14-16 June 1999, Bremen, Germany
Advanced Engineering Materials 2(4), 168–174 (2000) - [C]
Wiley-VCH, ISSN: 1438-1656 — doi: 10.1002/(SICI)1527-2648(200004)2:4<168::AID-ADEM168>3.0.CO;2-O — journal link
article
Properties and applications of cast aluminium sponges
1st International Conference on Metal Foams and Porous Metal Structures, 14-16 June 1999, Bremen, Germany
Advanced Engineering Materials 2(4), 188–191 (2000) - [C]
Wiley-VCH, ISSN: 1438-1656 — doi: 10.1002/(SICI)1527-2648(200004)2:4<188::AID-ADEM188>3.0.CO;2-G — journal link
article
Technological and fractographic investigations of lightweight structures made with aluminium foam
Aluminium 76(3), 166–171 (2000) - [R]
Aluminium-Verlag Düsseldorf, ISSN: 0002-6689 — doi: no such — journal link
article
Properties and applications of open-pored metallic materials (Offenporige Aluminiumwerkstoffe: Eigenschaften und Anwendungen)
Aluminium 75(12), 1094–1099 (1999) - [R]
Aluminium-Verlag Düsseldorf, ISSN: 0002-6689 — doi: no such — journal link
article postprint
Aluminiumschäumen im kontinuierlichen Betrieb
Metall 53(9), 501–503 (1999) - [R]
Giesel-Verlag, ISSN: 0026-0746 — doi: no such — web of science — journal link
article postprint
Fatigue behaviour of metallic foams
Journal of Materials Science Letters 18(8), 617–619 (1999) - [R]
Kluwer, ISSN: 0261-8028 — doi: 10.1023/A:1006646901741 — journal link
article postprint
Foam metal: the recipe
Europhysics News 30(1), 17–20 (1999) - [I]
Springer, ISSN: 0531-7479 — doi: 10.1007/s00770-999-0017-8 — journal link
article
Low-frequency internal friction of foamed Al
Philosophical Magazine A 78(6), 1329–1337 (1998) - [R]
Taylor & Francis, ISSN: 1478-6435 — doi: 10.1080/014186198253039 — journal link
article
Aluminiumschaum für den Fahrzeugbau [Innovative engineering - Aluminum foam for motor vehicles]
Metall 52(12), 726–729 (1998) - [R]
Giesel-Verlag, ISSN: 0026-0746 — doi: no such — web of science — journal link
article
Metal foaming by a powder metallurgical method: production, properties and applications
Materials Research Innovations 2(3), 181–188 (1998) - [R]
Springer, ISSN: 1432-8917 — doi: 10.1007/s100190050082 — journal link
article
Metal foams
Advanced Materials and Processes 154(5), 45–47 (1998) - [R]
ASM International, ISSN: 0026-0665 — doi: no such — web of science — journal link
article
Internal friction of foamed aluminium in the range of acoustic frequencies
Journal of Materials Science 33(7), 1769–1775 (1998) - [R]
Springer, ISSN: 0022-2461 — doi: 10.1023/A:1004380616293 — journal link
article
Deformation characteristics of metal foams
Journal of Materials Science 33(6), 1431–1440 (1998) - [R]
Springer, ISSN: 0022-2461 — doi: 10.1023/A:1004383222228 — journal link
article postprint
Aluminiumschaum - Entwicklungen und Anwendungsmöglichkeiten
Ingenieur-Werkstoffe 7, 43–45 (1998) - [I]
VDI-Verlag, ISSN: 0935-5715 — doi: no such
article postprint
Aluminium foams for transport industry
1997 Spring Meeting of the European-Materials-Research-Society, 16-20 June 1996, Strasbourg, France
Materials & Design 18(4-6), 217–220 (1997) - [C]
Elsevier, ISSN: 0261-3069 — doi: 10.1016/S0261-3069(97)00050-2 — journal link
article
Das Verformungsverhalten geschäumter Metalle
Metall 51(1-2), 19–24 (1997) - [I]
Hüthig-Verlag, ISSN: 0026-0746 — doi: no such — web of science — journal link
article
Damping properties of aluminium foams
Materials Science and Engineering A 205(1-2), 221–228 (1996) - [R]
Elsevier, ISSN: 0921-5093 — doi: 10.1016/0921-5093(95)09973-5 — journal link
article
Metallschaum - Werkstoff mit Perspektiven (Foamed Metal - A material with prospects)
Aluminium 70, 209–213 (1994) - [R]
Giesel-Verlag, ISSN: 0002-6689 — doi: no such — journal link
article
P/M technology for the production of metal foams
Powder metallurgy international 25(4), 182–185 (1993) - [R]
Schmid Verlag Freiburg, ISSN: 0048-5012 — doi: no such — web of science
article
Conference Proceedings
Heat Treatment of alumunium foam precursors: Effects on foam expansion and final cellular structure
8th International Conference on Porous Metals and Metallic Foams (MetFoam2013), Raleigh (USA), 23-26 June 2013
Procedia Materials Science 4 273–278 (2014)
Elsevier, ISSN 2211-8128 — doi: 10.1016/j.mspro.2014.07.559 — web of science — publisher, conference — P
article
Combustion foaming of Al-Ti intermetallics studied in situ by fast X-ray radioscopy
8th International Conference on Porous Metals and Metallic Foams (MetFoam2013), Raleigh (USA), 23-26 June 2013
Procedia Materials Science 4 268–272 (2014)
Elsevier, ISSN 2211-8128 — doi: 10.1016/j.mspro.2014.07.558 — web of science — publisher, conference — P
article
Role of ambient oxygen by the stabilization of single Al-films
8th International Conference on Porous Metals and Metallic Foams (MetFoam2013), Raleigh (USA), 23-26 June 2013
Procedia Materials Science 4 251–256 (2014)
Elsevier, ISSN 2211-8128 — doi: 10.1016/j.mspro.2014.07.555 — web of science — publisher, conference — P
article
Magnesium and magnesium alloy foams
7th International Conference on Porous Metals and Metallic Foams (MetFoam2011), Busan (Korea), 18-21 September 2011
in: "Porous Metals and Metallic Foams", Editors: B.-Y. Hur, B.-K. Kim, S.-E. Kim, S.-K. Hyun, GS Intervision, Seoul, p. 139–146 (2012)
ISBN 978-89-97231-39-3 — conference — P70725
article
Metal foaming studied in-situ by energy dispersive XRD of synchrotron radiation, X-ray radioscopy, and optical imaging
7th International Conference on Porous Metals and Metallic Foams (MetFoam2011), Busan (Korea), 18-21 September 2011
in: "Porous Metals and Metallic Foams", Editors: B.-Y. Hur, B.-K. Kim, S.-E. Kim, S.-K. Hyun, GS Intervision, Seoul, p. 13–19 (2012)
ISBN 978-89-97231-39-3 — conference — P70724
article
Foaming of aluminium alloys derived from scrap
7th International Conference on Porous Metals and Metallic Foams (MetFoam2011), Busan (Korea), 18-21 September 2011
in: "Porous Metals and Metallic Foams", Editors: B.-Y. Hur, B.-K. Kim, S.-E. Kim, S.-K. Hyun, GS Intervision, Seoul, p. 169–174 (2012)
ISBN 978-89-97231-39-3 — conference — P70723
article
2011
Imaging fast processes in liquid metal foams and semi-solid alloys using synchrotron radioscopy with spatio-temporal micro-resolution
1st International Workshop "In-Situ Studies with Photons, Neutrons and Electrons Scattering", 01-02 October 2009, Berlin, Germany
in: In-situ Studies with Photons, Neutrons and Electrons Scattering, Th. Kannengiesser, S.S. Babu, Y.-I. Komizo, A.J. Ramirez (Eds.)
Springer (2010), p. 149–158 (2010)
ISBN: 978-3-642-14793-7 — doi: 10.1007/978-3-642-14794-4_10 — web of science — publisher, conference — P55868
article (1st page) preprint
X-ray radioscopy of liquid metal foams under microgravity
International Conference on Solidification Science and Processing (ICSSP-4), 20-23 November 2009, Chennai, India
Transactions of the Indian Institute of Metals 62(4-5), 451–454 (2009)
Springer, ISSN: 0972-2815 — doi: 10.1007/s12666-009-0084-z — web of science — publisher, conference — P52835
article
Metallic foam experiment on MASER 11
19th ESA Symposium on European Rocket and Balloon Programmes and Related Research, 7-11 June 2009, Bad Reichenhall (Germany)
p. 403–406
ISBN: — doi: — web of science — publisher, conference — P54102
article
Optimisation of mould filling during PM metal foaming
Cellular Metals for Structural and Functional Applications (CellMet), 8-10 October 2008, Dresden, Germany
in "Cellular metals for structural and functional applications: CELLMET 2008", Ed.: G. Stephani, Fraunhofer-Institute IFAM, Dresden, Germany, p. 133–138 (2008)
ISBN: — doi: — web of science — publisher, conference — P
article
Aluminium foam sandwich panels: Metallurgy, manufacture and applications
5th International Conference on Porous Metals and Metallic Foams (MetFoam2007), 05-07 September 2007, Montréal, Canada
in "Porous Metals and Metallic Foams", Editors: L.P. Lefebvre, J. Banhart, D. Dunand), DEStech Pub., Pennsylvania (2008), pp. 3–6
ISBN: 978-1-932078-28-2 — doi: — web of science — publisher, conference — P39819
article
New foam-stabilizing additive for aluminium
5th International Conference on Porous Metals and Metallic Foams (MetFoam2007), 05-07 September 2007, Montréal, Canada
in "Porous Metals and Metallic Foams", Editors: L.P. Lefebvre, J. Banhart, D. Dunand), DEStech Pub., Pennsylvania (2008), pp. 27–30
ISBN: 978-1-932078-28-2 — doi: — web of science — publisher, conference — P24179
article
Effect of Relative Humidity on Pressure Induced Foaming (PIF) of Aluminium-based Precursors
5th International Conference on Porous Metals and Metallic Foams (MetFoam2007), 05-07 September 2007, Montréal, Canada
in "Porous Metals and Metallic Foams", Editors: L.P. Lefebvre, J. Banhart, D. Dunand), DEStech Pub., Pennsylvania (2008), pp. 59–62
ISBN: 978-1-932078-28-2 — doi: — web of science — publisher, conference — P18855
article
Aluminium-based metallic films
5th International Conference on Porous Metals and Metallic Foams (MetFoam2007), 05-07 September 2007, Montréal, Canada
in "Porous Metals and Metallic Foams", Editors: L.P. Lefebvre, J. Banhart, D. Dunand), DEStech Pub., Pennsylvania (2008), pp. 71–74
ISBN: 978-1-932078-28-2 — doi: — web of science — publisher, conference — P18853
article
Aluminium foaming monitored by far-infrared thermography: temperature gradients and bubble rupture
5th International Conference on Porous Metals and Metallic Foams (MetFoam2007), 05-07 September 2007, Montréal, Canada
in "Porous Metals and Metallic Foams", Editors: L.P. Lefebvre, J. Banhart, D. Dunand), DEStech Pub., Pennsylvania (2008), pp. 79–82
ISBN: 978-1-932078-28-2 — doi: — web of science — publisher, conference — P18845
article
Methodology for in-situ observation of Alporas foams using X-ray radioscopy
5th International Conference on Porous Metals and Metallic Foams (MetFoam2007), 05-07 September 2007, Montréal, Canada
in "Porous Metals and Metallic Foams", Editors: L.P. Lefebvre, J. Banhart, D. Dunand), DEStech Pub., Pennsylvania (2008), pp. 111–114
ISBN: 978-1-932078-28-2 — doi: — web of science — publisher, conference — P24182
article
Deformation mechanisms in constrained monotonic and cyclic compressive loading of Al foam
5th International Conference on Porous Metals and Metallic Foams (MetFoam2007), 05-07 September 2007, Montréal, Canada
in "Porous Metals and Metallic Foams", Editors: L.P. Lefebvre, J. Banhart, D. Dunand), DEStech Pub., Pennsylvania (2008), pp. 347–350
ISBN: 978-1-932078-28-2 — doi: — web of science — publisher, conference — P46638
article
Foam research in microgravity
Third International Symposium on Physical Sciences in Space (ISPS 2007), 22-26 October 2007, Nara, Japan
Journal of The Japan Society of Microgravity Application 25(3), 241–244 (2008)
ISSN: 0915-3616 — doi: — web of science — publisher, conference — P51925
article
Metallic foam experiments under microgravity
18th ESA Symposium on European Rocket and Balloon Programmes and Related Research, 3-7 June 2007, Visby, Sweden
Proceedings, Editor: L. Conroy, ESTEC/ESA Publishing Division, Noordwijk, ESA Special Publications 647, 389–392 (2007)
ISSN: 03796566, ISBN 92-9291-211-7 — doi: — web of science — publisher, conference — P38979
article
Anomalous behaviour of aluminium foams during solidification
3rd International Conference on Solidification Science and Processing (ICSSP-2006), 20-23 Novenber 2006, Jaipur, India
Transactions of the Indian Institute of Metals 60(2-3), 133–136 (2007)
ISSN: 0972-2815 — doi: — web of science — publisher, conference — P17451
article
Grain refiners as liquid metal foam stabilisers
3rd International Conference on Solidification Science and Processing (ICSSP-2006), 20-23 Novenber 2006, Jaipur, India
Transactions of the Indian Institute of Metals 60(2-3), 127–132 (2007)
ISSN: 0972-2815 — doi: — web of science — publisher, conference — P54575
article
Metal foams - from fundamental research to applications
Conference on the Frontiers in the Design of Materials (FDM 2005), 12-13 November 2005, Chennai, India
in "Frontiers in the Design of Materials", Editors: Baldev Raj, S. Ranganathan, K. Bhanu Sankara Rao, M.D. Matthew, P. Shankar
Universities Press (India) Limited, Hyderabad, India (2007), 279–289
ISBN: 8173715777 — doi: — web of science — publisher, conference — P15402
article
3D image analysis and mu-synchrotron-tomography for studying multi-component, micro-structured material systems
Fifth International Conference on Synchrotron Radiation in Materials Science (SRMS5), 30 July - 2 August 2006, Chicago, USA
Proceedings, published online on website (2006), poster SRMS5-187
ISBN: — doi: — web of science — publisher, conference — P-
article
Foaming around fastening elements
III International Materials Symposium "Materiais 2005" and XII Encontro da Sociedade Portuguesa de Materiais, 20-23 March 2005, Aveiro, Portugal
in "Advanced Materials Forum III", Editor: Paula Maria Vilarinho, Materials Science Forum 514-516, 712–717 (2006)
Transtech Publications, ISSN: 0255-5476, ISBN: 0-87849-402-2 — doi: 10.4028/www.scientific.net/MSF.514-516.712 — web of science — publisher, conference — P-4272
article
Optimisation of the strength of aluminium foam sandwich (AFS) panels by different heat treatments
International Conference on Aluminium Alloys (ICAA-10), 9-13 July 2006, Vancouver, Canada
in "Aluminium Alloys 2006 - research through innovation and technology", Editors: W.J. Poole, M.A. Wells, D.J. Lloyd, Materials Science Forum 519-521(1-2), 1221-1226 (2006)
Transtech Publications, ISSN: 0255-5476, ISBN 0-87849-408-1 — doi: 10.4028/www.scientific.net/MSF.519-521.1221 — web of science — publisher, conference — P15868
article
Study of the evolution of semi-solid alloys by means of phase-sensitive synchrotron tomography
9th European Conference on Non-Destructive Testing, ECNDT, 25-29 September 2006, Berlin, Germany
Proceedings, DGZfP-Proceedings BB103-CD and published online on website "ndt.net" (2006)
ISBN: 3-931381-86-2 — doi: — web of science — publisher, conference — P17956
article
Metal foams - the mystery of stabilisation
4th International Conference on Porous Metals and Metal Foaming Technology (MetFoam2005/JIMIC-4), 21-23 September 2005, Kyoto, Japan
Porous Metals and Metal Foaming Technology, Editors: H. Nakajima, N. Kanetake, The Japan Institute of Metals, Sendai, 75–86 (2006)
ISBN: 4-88903-405-6 — doi: — web of science — publisher, conference (TOC) — P15407
article
Role of oxidation in aluminium foams blown by external gas injection
4th International Conference on Porous Metals and Metal Foaming Technology (MetFoam2005/JIMIC-4), 21-23 September 2005, Kyoto, Japan
Porous Metals and Metal Foaming Technology, Editors: H. Nakajima, N. Kanetake, The Japan Institute of Metals, Sendai, 261–266 (2006)
ISBN: 4-88903-405-6 — doi: — web of science — publisher, conference (TOC) — P14819
article
The role of the gas pressure on the foaming of metals following the PM-route
4th International Conference on Porous Metals and Metal Foaming Technology (MetFoam2005/JIMIC-4), 21-23 September 2005, Kyoto, Japan
Porous Metals and Metal Foaming Technology, Editors: H. Nakajima, N. Kanetake, The Japan Institute of Metals, Sendai, 129–132 (2006)
ISBN: 4-88903-405-6 — doi: — web of science — publisher, conference (TOC) — P14577
article
Fracture Behavior of Metal Foam Made of Recycled MMC by the Melt Route
4th International Conference on Porous Metals and Metal Foaming Technology (MetFoam2005/JIMIC-4), 21-23 September 2005, Kyoto, Japan
Porous Metals and Metal Foaming Technology, Editors: H. Nakajima, N. Kanetake, The Japan Institute of Metals, Sendai, 589-592 (2006)
also published in: Materials Transactions 47(9), 2219–2222 (2006)
ISBN: 4-88903-405-6 — doi: — web of science — publisher, conference (TOC) — P
article conference article
Zirconium hydride - a possible blowing agent for making aluminium foams
4th International Conference on Porous Metals and Metal Foaming Technology (MetFoam2005/JIMIC-4), 21-23 September 2005, Kyoto, Japan
Porous Metals and Metal Foaming Technology, Editors: H. Nakajima, N. Kanetake, The Japan Institute of Metals, Sendai, 107–110 (2006)
ISBN: 4-88903-405-6 — doi: — web of science — publisher, conference (TOC) — P
article
Influence of alloying additions on foaming behaviour of thixocast AlSill precursor
4th International Conference on Porous Metals and Metal Foaming Technology (MetFoam2005/JIMIC-4), 21-23 September 2005, Kyoto, Japan
Porous Metals and Metal Foaming Technology, Editors: H. Nakajima, N. Kanetake, The Japan Institute of Metals, Sendai, 123–128 (2006)
ISBN: 4-88903-405-6 — doi: — web of science — publisher, conference (TOC) — P
article
Metal foams - towards high temperature colloid chemistry
in "Colloidal Particles at liquid Interfaces", Editors B.P. Binks, T.S. Horozov, Cambridge University Press, Cambridge, pp. 445–499 (2006)
ISBN: 978-0-521-84846-6 — doi: — web of science — publisher, conference — P12922
postprint
Liquid metal foams - feasible in-situ experiments under low gravity
4th International Conference on Solidification and Gravity, 6-9 September, Miskolc-Lillafüred, Hungary
Materials Science Forum 508, 275–280 (2006)
Transtech Publications, ISBN 0-87849-991-1, ISSN: 0255-5476 — doi: 10.4028/www.scientific.net/MSF.508.275 — web of science — publisher, conference — P14818
article
In situ radiography of the metal foaming process: a quantitative analysis. 3rd Workshop of NDT experts, 10-12 October 2005, Prague, Czech Republic
in "NDT in Progress", Editor: P. Mazal, University of Technology, Brno, p. 223–234 (2005)
ISBN 80-2142996-8 — doi: — web of science — publisher, conference (TOC) — P-
article
Investigation of the influence of blowing agent and alloy composition on the foaming behaviour of thixocast AlSi6Cu4 precursor material.
Cellular Metals for Structural and Functional Applications (CellMet2005), 18-20 May 2005, Dresden, Germany
Proceedings, Editors: G. Stephani, B. Kieback, Fraunhofer IRB Verlag, Stuttgart, p. 244–252 (2005)
ISBN 978-3-8167-6931-6 — doi: — web of science — publisher, conference — P15355
article
Foaming kinetics of Al-Cu-Si alloys
Cellular Metals for Structural and Functional Applications (CellMet2005), 18-20 May 2005, Dresden, Germany
Proceedings, Editors: G. Stephani, B. Kieback, Fraunhofer IRB Verlag, Stuttgart, p. 253–257 (2005)
ISBN 978-3-8167-6931-6 — doi: — web of science — publisher, conference — P17719
article
Aluminium Foam Technology - Towards Industrial Implementation
53rd Indian Foundry Congress, 21-23 January 2005, Kolkata, India
Indian Foundry Journal 51, 36–41 (2005)
ISSN 0379-5446 — doi: — web of science — publisher, conference — P15404
article
Influence of powder pre-treatments on metal foam pore structure
Cellular Metals and Polymers (CMAP), 12-14 October 2004, Erlangen, Germany
in "Cellular Metals and Polymers", Editors: R. F. Singer, C. Körner, V. Altstädt, H. Münstedt, Trans Tech Publications, Ülikon-Zuerich, p. 57–60 (2005)
ISBN 0-87849-491-X — doi: — web of science — publisher, conference, TOC — P12354
postprint article (OCR)
Analysis of metal foaming behaviour and development of foaming processes
Cellular Metals and Polymers (CMAP), 12-14 October 2004, Erlangen, Germany
in "Cellular Metals and Polymers", Editors: R. F. Singer, C. Körner, V. Altstädt, H. Münstedt, Trans Tech Publications, Ütlikon-Zuerich, p. 31–34 (2005)
ISBN 0-87849-491-X — doi: — web of science — publisher, conference, TOC — P11743
postprint article (OCR)
Decomposition behaviour of as-received and oxidised TiH2 powder
PM2004 - Powder Metallurgy World Congress, 17-21 October 2004, Vienna, Austria
Proceedings, Editors: H. Danninger, R. Ratzi, European Powder Metallurgy Association, Shrewsbury, UK, Vol. 4, PM Lightweight and Porous Materials; Powder Injection Moulding; PM Functional Materials, 149–155 (2004)
ISBN 1-89907-215-2 — doi: — web of science — publisher, conference (TOC) — P-
article
High-resolution microtomography and fast radiography for real-time and in-situ characterisation of porous microstructures.
16th World Conference on Non-destructive Testing, 30 August - 3 September 2004, Montreal, Canada Proceedings, published online on website "ndt.net" (2004)
ISBN — doi: — web of science — publisher, conference — P-
article
Characterisation of metal foams with synchrotron tomography and 3D image analysis
16th World Conference on Non-destructive Testing, 30 August - 3 September 2004, Montreal, Canada Proceedings, published online on website "ndt.net" (2004)
ISBN — doi: — web of science — publisher, conference — P11019
article
Quantitative analysis of pore-particle correlations in metallic foams
16th World Conference on Non-destructive Testing, 30 August - 3 September 2004, Montreal, Canada Proceedings, published online on website "ndt.net" (2004)
ISBN — doi: — web of science — publisher, conference — P-
article
Metallschaumcharakterisierung mittels Synchrotron-Tomographie
DACH-Tagung (DACH = D-A-CH Dreiländertagung), 17-19 Mai 2004, Salzburg, Austria
Proceedings, published online on website "ndt.net", Berichtsband BB89-CD, (2004)
ISBN — doi: — web of science — publisher, conference — P-
article
Industrialisation of aluminium foam technology
International Conference on Aluminium Alloys (ICAA-9), Brisbane, Australia, 2-5 August 2004
in "Aluminium alloys - their physical and mechanical properties", Editors: B.C. Muddle, A.J. Morton, J.-F. Nie, Institute of Materials Engineering Australia, North Melbourne, p. 764–770 (2004)
ISBN 1-87685-522-3 — doi: — web of science — publisher, conference — P14030
article
Metallschäume: Produktion - Charakterisierung - Anwendungen oder Von der Mikrostruktur zu Anwendungen.
37. Metallographietagung, 17-19 September 2003, Berlin, Germany
in "Fortschritte in der Metallographie", Werkstoff-Informationsgesellschaft, Frankfurt, p. 291–298 (2004)
ISBN — doi: — web of science — publisher, conference, TOC — P9189
article
Current state of metal foaming technology
Recent Research Developments in Materials Science 4, 489–507 (2003)
ISBN 81-271-022-6 — doi: — web of science — publisher
article article (OCR)
Metal foams - manufacture and physics of foaming
International Conference on Advanced Metallic Materials, 5-7 November 2003, Smolenice, Slovakia
Proceedings, Editors: J. Jerz, P. Sebo, M. Zemánková, Institute Of Materials and Machine Mechanics, Bratislava, p. 5–15 (2003)
ISBN 80-9690117-6 — doi: — web of science — publisher, conference — P9648
article
Synchrotron tomography on metallic foams
International Symposium on Computed Tomography and Image Processing for Industrial Radiology, 23-25 June 2003, Berlin, Germany
Electronic Proceedings, Gesellschaft für Zerstörungsfreie Prüfung, Berlin (2003)
ISBN 3-931381-48-X — doi: — web of science — publisher, conference — P9188
article
Real time X-ray radioscopy on metallic foams using a compact micro-focus source
3rd International Conference on Cellular Metals and Metal Foaming Technology (MetFoam 2003), 23-25 June 2003, Berlin, Germany
in: "Cellular Metals: Manufacure, Properties and Applications", Editors: J. Banhart, N.A. Fleck, A. Mortensen, MIT-Verlag, Berlin, 89–94 (2003)
ISBN 3-935538-12-X — doi: — web of science — publisher, conference — P9651
article
Investigation of early stages of metal foam formation by small-angle neutron scattering techniques
3rd International Conference on Cellular Metals and Metal Foaming Technology (MetFoam 2003), 23-25 June 2003, Berlin, Germany
in: "Cellular Metals: Manufacure, Properties and Applications", Editors: J. Banhart, N.A. Fleck, A. Mortensen, MIT-Verlag, Berlin, 113–118 (2003)
ISBN 3-935538-12-X — doi: — web of science — publisher, conference — P9652
article
Heat distribution during metal foaming
3rd International Conference on Cellular Metals and Metal Foaming Technology (MetFoam 2003), 23-25 June 2003, Berlin, Germany
in: "Cellular Metals: Manufacure, Properties and Applications", Editors: J. Banhart, N.A. Fleck, A. Mortensen, MIT-Verlag, Berlin, 165–168 (2003)
ISBN 3-935538-12-X — doi: — web of science — publisher, conference — P9653
article
Semi-solid proceesing of complex-shaped foamable material
3rd International Conference on Cellular Metals and Metal Foaming Technology (MetFoam 2003), 23-25 June 2003, Berlin, Germany
in: "Cellular Metals: Manufacure, Properties and Applications", Editors: J. Banhart, N.A. Fleck, A. Mortensen, MIT-Verlag, Berlin, 169–174 (2003)
ISBN 3-935538-12-X — doi: — web of science — publisher, conference — P9654
article
Synchrotron tomography on zinc and aluminium foams
3rd International Conference on Cellular Metals and Metal Foaming Technology (MetFoam 2003), 23-25 June 2003, Berlin, Germany
in: "Cellular Metals: Manufacure, Properties and Applications", Editors: J. Banhart, N.A. Fleck, A. Mortensen, MIT-Verlag, Berlin, 295–300 (2003)
ISBN 3-935538-12-X — doi: — web of science — publisher, conference — P9161
article
An experimental study of the deformation rate sensitivity of PM aluminium foams
3rd International Conference on Cellular Metals and Metal Foaming Technology (MetFoam 2003), 23-25 June 2003, Berlin, Germany
in: "Cellular Metals: Manufacure, Properties and Applications", Editors: J. Banhart, N.A. Fleck, A. Mortensen, MIT-Verlag, Berlin, 463–468 (2003)
ISBN 3-935538-12-X — doi: — web of science — publisher, conference — P9655
article
The evolution of morphology and kinetics during the foaming process of aluminium
1st International Materials Symposium, Coimbra, Portugal, 9-11 April 2001
in "Advanced Materials Forum I", Editor: T. Vieira, Key Engineering Materials 230-232, 96–101 (2002)
ISSN 1662-9795 — doi: 10.4028/www.scientific.net/KEM.230-232.96 — web of science — publisher, conference
article
Investigation of the foaming process of metals by synchrotron-radiation imaging
10th Annual International Symposium on Smart Structures and Materials, San Diego, USA, 2-6 March 2002
In: Proceedings of SPIE, Editors: N. Meyendorf, G.Y. Baaklini, B. Michel, Vol. 5045, 254–265 (2003)
ISBN 9780819448507 — doi: 10.1117/12.484282 — web of science — publisher, publisher, conference
preprint article
Making cellular metals from metals other than aluminium
In: Handbook of Cellular Metals, Editors: H.-P. Degischer, B. Kriszt, Wiley-VCH, Weinheim, 21–28 (2002)
ISBN 3-527-30339-1 — doi: 10.1002/3527600558.ch2 — web of science — publisher
article article (OCR) preprint
Industrialisation of powder-compact foaming technique
In: Handbook of Cellular Metals, Editors: H.-P. Degischer, B. Kriszt, Wiley-VCH, Weinheim, 14–21 (2002)
ISBN 3-527-30339-1 — doi: 10.1002/3527600558.ch2 — web of science — publisher
article article (OCR) preprint
Sandwich panels
In: Handbook of Cellular Metals, Editors: H.-P. Degischer, B. Kriszt, Wiley-VCH, Weinheim, 113–125 (2002)
ISBN 3-527-30339-1 — doi: 10.1002/3527600558.ch3 — web of science — publisher
article article (OCR) preprint
Functional applications
In: Handbook of Cellular Metals, Editors: H.-P. Degischer, B. Kriszt, Wiley-VCH, Weinheim, 313–320 (2002)
ISBN 3-527-30339-1 — doi: 10.1002/3527600558.ch7 — web of science — publisher
article article (OCR) preprint
Cellular Metals: New materials, new applications, new science
International Congress on Advanced Materials, Processes and Applications - 2001, 1-4 October 2001, München, Germany
Electronic proceedings, Symposium I3 (2001)
ISBN 3-88355-302-6 — doi: — web of science — publisher, conference
article article (OCR)
Methods and models of metallic foam fabrication
8th Annual International Conference on Composites Engineering (ICEE/8), 5-11 August 2001, Tenerife, Spain
Proceedings, Editor: D. Hui, International Community for Composites Engineering, Tenerife, p. 977–978 (2001)
ISBN none — doi: — web of science — publisher, conference (TOC)
article article (OCR)
Study of lead foams under microgravity
2nd International Conference on Cellular Metals and Metal Foaming Technology (MetFoam 2001), 18-20 June 2001, Bremen, Germany
in: "Cellular Metals and Metal Foaming Technology", Editors: J. Banhart, M.F. Ashby, N.A. Fleck, MIT-Verlag Bremen, p. 7 (2001)
ISBN 3-935538-11-1 — doi: — web of science — publisher, conference
article
Investigation of metal foam formation by ultra-small angle neutron scattering
2nd International Conference on Cellular Metals and Metal Foaming Technology (MetFoam 2001), 18-20 June 2001, Bremen, Germany
in: "Cellular Metals and Metal Foaming Technology", Editors: J. Banhart, M.F. Ashby, N.A. Fleck, MIT-Verlag Bremen, p. 111 (2001)
ISBN 3-935538-11-1 — doi: — web of science — publisher, conference
article
Viewing the early stage of metal foam formation by high-resolution computed tomography
2nd International Conference on Cellular Metals and Metal Foaming Technology (MetFoam 2001), 18-20 June 2001, Bremen, Germany
in: "Cellular Metals and Metal Foaming Technology", Editors: J. Banhart, M.F. Ashby, N.A. Fleck, MIT-Verlag Bremen, p. 239 (2001)
ISBN 3-935538-11-1 — doi: — web of science — publisher, conference
article
Sound transmission study on liquid foams
2nd International Conference on Cellular Metals and Metal Foaming Technology (MetFoam 2001), 18-20 June 2001, Bremen, Germany
in: "Cellular Metals and Metal Foaming Technology", Editors: J. Banhart, M.F. Ashby, N.A. Fleck, MIT-Verlag Bremen, p. 255 (2001)
ISBN 3-935538-11-1 — doi: — web of science — publisher, conference
article
Ultra-lightweight aluminium foam materials for automotive applications.
SAE 2000 World Congress, 5-8 March 2000, Detroit, USA
Proceedings, Session: Powder Metal Technology Innovations for Mass Reduction & Increased Fuel EconomySociety of Automotive Engineers, paper 2000-01-0335
ISBN 0-7680-0769-0 — doi: 10.4271/2000-01-0335 — web of science — publisher, conference
article article (OCR)
High-resolution radioscopy and tomography for light materials and devices.
15th World Conference on Nondestructive Testing (WCNDT), 15-21 October 2000, Roma, Italy
Proceedings, published online on website "ndt.net" (2000)
ISBN none — doi: — web of science — publisher, conference
article
Metal foams
in "Ullmann's Encyclopedia of Industrial Chemistry", Editor: M. Bohnet, 6th edition, Wiley-VCH, Weinheim (2000)
ISBN 3-527-30385-5 — doi: — web of science — publisher, conference
article
Influence of heat treatment on fatigue phenomena of aluminium foams under compressive loading.
International Congress on Advanced Materials, Processes and Applications - Materials Week 2000, 25-28 September 2000, München, Germany
In: Electronic Proceedings of Materials Week 2000, München, Editor: H.P. Degischer
ISBN 3-88355-296-8 — doi: — web of science — publisher, conference
article
In-situ observation of the foaming process in aluminium by means of X-ray radioscopy.
International Congress on Advanced Materials, Processes and Applications - Materials Week 2000, 25-28 September 2000, München, Germany
In: Electronic Proceedings of Materials Week 2000, München, Editor: H.P. Degischer
ISBN 3-88355-296-8 — doi: — web of science — publisher, conference
article
Development of advanced foams under microgravity.
1st International Symposium on Microgravity Research & Applications in Physical Sciences & Biotechnology, 10-15 September 2000, Sorrento, Italy
Proceedings, ESTEC/ESA Publishing Division, Noordwijk, ESA Special Publications SP-454, 589–596 (2000)
ISBN none — doi: — web of science — publisher, conference (TOC)
article
In-situ monitoring of metal foam evolution and decay
3rd EuroConference on Foams, Emulsions and Applications, 5-8 June 2000, Delft, Netherlands
in "Foams and Emulsions", Editors: P. Zitha, J. Banhart, G. Verbist, MIT-Verlag Bremen, p. 290–296 (2000)
ISBN 3-9805748-9-X — doi: — web of science — publisher, conference
article
Investigation of lead foams under microgravity
3rd EuroConference on Foams, Emulsions and Applications, 5-8 June 2000, Delft, Netherlands
in "Foams and Emulsions", Editors: P. Zitha, J. Banhart, G. Verbist, MIT-Verlag Bremen, p. 98–103 (2000)
ISBN 3-9805748-9-X — doi: — web of science — publisher, conference
article
Metallic foams - Challenges and opportunities (Overview)
3rd EuroConference on Foams, Emulsions and Applications, 5-8 June 2000, Delft, Netherlands
in "Foams and Emulsions", Editors: P. Zitha, J. Banhart, G. Verbist, MIT-Verlag Bremen, p. 13–20 (2000)
ISBN 3-9805748-9-X — doi: — web of science — publisher, conference
article
Influence of process parameters on the expansion behaviour of aluminium foam
European Congress on Advanced Materials and Processes - Euromat 99, 27-30 September 1999, München, Germany
in "Metal Matrix Composites and Metallic Foams", Editors: T.W. Clyne, F. Simancik, Euromat Vol. 5, Wiley-VCH, Weinheim, p. 14–21 (2000)
ISBN 1-878954-74-1 — doi: — web of science — publisher, conference - (TOC)
article article (OCR)
Properties and applications for cast aluminium sponges
1st International Conference on Metal Foams and Porous Metal Structures (MetFoam'99), 14-16 June 1999, Bremen, Germany
in "Metal Foams Porous Metal Structures", Editors: J. Banhart, M.F. Ashby, N.A Fleck, MIT-Verlag Bremen, p. 159–162 (1999)
ISBN 3-9805748-7-3 — doi: — web of science — publisher, conference
article
Characterisation of the foaming kinetics of aluminium
1st International Conference on Metal Foams and Porous Metal Structures (MetFoam'99), 14-16 June 1999, Bremen, Germany
in "Metal Foams Porous Metal Structures", Editors: J. Banhart, M.F. Ashby, N.A Fleck, MIT-Verlag Bremen, p. 97–104 (1999)
ISBN 3-9805748-7-3 — doi: — web of science — publisher, conference
article
Bending crush behaviour of foam-filled sections
1st International Conference on Metal Foams and Porous Metal Structures (MetFoam'99), 14-16 June 1999, Bremen, Germany
in "Metal Foams Porous Metal Structures", Editors: J. Banhart, M.F. Ashby, N.A Fleck, MIT-Verlag Bremen, p. 337–346 (1999)
ISBN 3-9805748-7-3 — doi: — web of science — publisher, conference
article article (OCR)
Development of advanced foams under microgravity
International Workshop on Foams and Films, 05-06 March 1999, Leuven, Belgium
in ”Foams and Films”, Editors: D. Weaire, J. Banhart, Verlag MIT Bremen, p. 73–78 (1999)
ISBN 3-9805748-5-7 — doi: — web of science — publisher, conference
article
Weight savings by aluminium metal foams: production, properties and applications in automotive
SAE International Congress & Exposition, Session: P/M Applications (Part C), 1-4 March 1999, Detroit, USA
Society of Automotive Engineers, Warrendale, SAE-SP 1447, paper no. 1999-01-0887 (1999)
ISBN 0-7680-0379-2 — doi: 10.4271/1999-01-0887 — web of science — publisher, conference
(identical to 26)
Weight savings by aluminium metal foams: production, properties and applications in automotive
Powder Metallurgy Aluminum & Light Alloys for Automotive Applications Conference, 10-11 November 1998, Dearborn, USA
Proceedings, Editors: W.F. Jandreska, R.A. Chernenkoff, Metal Powder Industries Federation, Princeton, p. 127–134 (1998)
ISBN 1-878954-70-9 — doi: - — web of science — publisher, conference
article article (OCR)
Powder injection and formation of porosity in spray forming
1998 Powder Metallurgy World Congress and Exhibition, 18-22 October 1998, Granada, Spain
Proceedings, European Powder Metallurgy Association, Shrewsbury, Vol. 5, p. 265–270 (1998)
ISBN 1-89907-209-8 — doi: — web of science — publisher, conference
article
Aluminium foams
ASM Handbook, Editors: W.B. Eisen, B.L. Ferguson, R.M., German, R. Iacocca, P.W. Lee, D. Madan, K. Moyer, H. Sanderow, and Y. Trudel, ASM International, Materials Park (1998), Vol. 7, p. 1041–1047
ISBN 978-0-87170-387-3 — doi: — web of science — publisher,
article
Light-weight aluminium foam structures for ships
Conference on Materials in Oceanic Environment (Euromat ’98), 22-24 July 1998, Lisbon, Portugal
Proceedings, Vol. 1, Editor: L. Faria, Sociedade Portuguesa de Materials, Lisbon, p. 55–63 (1998)
ISBN - — doi: — web of science — publisher, conference
article
Production methods for metallic foams
Materials-Research-Society Symposium on Porous and Cellular Materials for Structural Applications, 13-15 April 1998, San Francisco, USA
MRS Symposium Proceedings 521, Editors: D.S. Schwartz, D.S. Shih, A.G. Evans, H.N.G. Wadley, Materials Research Society, Warrendale, p.121–132 (1998)
ISBN 1-55899-427-0 — doi: 10.1557/PROC-521-121 — web of science — publisher, conference (TOC)
article
Production methods for metal foams
Fraunhofer USA Metal Foam Symposium, 07-08 October 1997, Stanton, Delaware (USA)
in "Metal Foams", Editors: J. Banhart und H. Eifert, Verlag MIT, Bremen (1998), p. 3–12
ISBN 3-9805748-5-7 — doi: — web of science — publisher, conference
article
Mechanical properties of metal foams
Fraunhofer USA Metal Foam Symposium, 07-08 October 1997, Stanton, Delaware (USA)
in "Metal Foams", Editors: J. Banhart und H. Eifert, Verlag MIT, Bremen (1998), p. 37–48
ISBN 3-9805748-5-7 — doi: — web of science — publisher, conference
article
Powder metallurgical process for the production of metal foams
Fraunhofer USA Metal Foam Symposium, 07-08 October 1997, Stanton, Delaware (USA)
in "Metal Foams", Editors: J. Banhart und H. Eifert, Verlag MIT, Bremen (1998), p. 13–22
ISBN 3-9805748-5-7 — doi: — web of science — publisher, conference
article
Production and properties of ultra-lightweight aluminium foams for industrial applications
4th International Conference on Composites Engineering ICEE/4, 06-12 July 1997, Hawaii, USA
Proceedings, Editor: D. Hui, International Community for Composites Engineering, New Orleans, p. 943–944 (1997)
ISBN none — doi: — web of science — publisher, conference (TOC)
article article (OCR)
Aluminiumschäume und ihre Eigenschaften
VDI/VDG Tagung: Fortschritte mit Gußkonstruktionen, 13-14 March 1997, Veitshöchheim, Germany
VDI-Verlag Düsseldorf, VDI-Berichte 1324, 75–89 (1997)
ISBN 3-18-091324-X — doi: — web of science — publisher, conference
article article (OCR)
Metal foams under extreme conditions
5th European Conference on Advanced Materials, Processes and Applications (Euromat '97), 21-23 April 1997, Maastricht, The Netherlands
in "Euromat 97 - Proceedings of the 5th Eururopean Conference on Advanced Materials, Processes and Applications" Editors.: L.A.J.L. Sarton, H.B. Zeedlijk, Netherlands Society for Materials Science, Zwindrecht, Vol. 1, Metals and Composites, p. 467–470 (1997)
ISBN 90-803513-1-8 — doi: — web of science — publisher, conference (TOC)
article article (OCR)
Untersuchungen des Schäumens von Metallen
Symposium Metallschäume, 6-7 March 1997, Bremen, Germany
in "Metallschäume", Editor: J. Banhart, Verlag MIT, Bremen, p. 91–102 (1997)
ISBN 3-9805748-0-6 — doi: — web of science — publisher, conference
article
Grundlegende Untersuchungen zur Herstellung von Aluminiumschaum
Werkstoffwoche, 28-31 May 1996, Stuttgart, Germany
in "Werkstoffe für die Verkehrstechnik", Tagungsband Symposium 2, Editor: U. Koch, DGM Informationsgesellschaft, Frankfurt (1996), p. 143–149 (1996)
ISBN 3-88355-230-5 — doi: — web of science — publisher, conference (TOC)
article article (OCR)
Aluminium foams for automotive applications
29th International Symposium on Automotive Technology and Automation (ISATA), 3-6 June 1996, Firenze, Italy
in "Materials for Energy-efficient Vehicles", Editor: D. Roller, Automotive Automation Ltd., Croydon, Vol. 1, p. 611–618 (1996)
ISBN 0-947719-86-5 — doi: — web of science — publisher, conference
article article (OCR)
Calculation of spontaneous resistance anisotropy of disordered ferromagnetic alloys
NATO Advanced Study Institute on Stability of Materials, 25 June-07 July 1994, Corfu, Greece
in: "Stability of Materials", Editors: A. Gonis, P.E.A. Turchi, J. Kudrnovski, Plenum Press, NATO-ASI Series Physics B355, 437–442 (1996)
ISBN 0-306-45311-8, ISSN 0258-1221 — doi: — web of science — publisher, conference (TOC)
article article (OCR)
Hocheffiziente Energieabsorber aus Aluminiumschaum
Neue Werkstoffe im Automobilbau: Einsatzgebiete - Prozesstechnik - Potentiale, 15. VDI-VW-Gemeinschaftstagung, 29 November-1 December 1995, Wolfsburg, Germany
VDI-Verlag Düsseldorf, VDI-Berichte 1235, 293–303 (1995)
ISBN 3-18-091235-9 — doi: — web of science — publisher, conference
article article (OCR)
Powder metallurgical technology for the production of metal foam
European Conference on Advanced PM Materials (Euro PM'95), 23-25 October 1995, Birmingham, UK
Proceedings, European Powder Metallurgy Association, Shrewsbury, UK, p. 201–208 (1995)
ISBN 1-89907-202-0 — doi: — web of science — publisher, conference
article
Effiziente Herstellungsmöglichkeiten für Bauteile aus geschäumten Metallen
Werkstofftag '95 - Effizienzsteigerung durch innovative Werkstofftechnik, 15-16 March 1995, Aachen, Germany
VDI-Verlag Düsseldorf, VDI-Berichte 1151, 223–230 (1995)
ISBN 3-18-091151-4 — doi: — web of science — publisher, conference
article article (OCR)
Selected mechanical and physical properties of metal foams
Powder Metallurgy World Congress (PM'94), 6-9 June 1994, Paris, France
Proceedings, Société Française de Métallurgie et de Matériaux and European Powder Metallurgy Association, Editions de Physique, Les Ulis, Vol. 1, p. 585–588 (1994)
ISBN 2-86883-221-0 — doi: — web of science — publisher, conference (TOC)
article article (OCR)
Methods for the production of metallic foams
Powder Metallurgy World Congress (PM'94), 6-9 June 1994, Paris, France
Proceedings, Société Française de Métallurgie et de Matériaux and European Powder Metallurgy Association, Editions de Physique, Les Ulis, Vol. 1, p. 609–612 (1994)
ISBN 2-86883-221-0 — doi: — web of science — publisher, conference (TOC)
article article (OCR)
Möglichkeiten zur Herstellung von Bauteilen aus geschäumten Metallen
Hagener Symposium "Innovative und wirtschaftliche Bauteile durch Pulvermetallurgie", 25-26 November 1993, Hagen, Germany
in "Pulvermetallurgie in Wissenschaft und Praxis", Editor: H. Kolaska, VDI-Verlag, Düsseldorf, Bd. 9, p. 330–348 (1993)
ISBN 3-18-401366-9 — doi: — web of science — publisher, conference (TOC)
article article (OCR)
Energy absorption of foamed metals prepared by a powder metallurgical method
International Conference on Materials by Powder Technology, PTM'93, 22-26 March 1993, Dresden, Germany
in "Materials by Powder Technology", Editor: F. Aldinger, DGM Informationsgesellschaft, Oberursel, p. 501–505 (1993)
ISBN 3-88355-191-0 — doi: — web of science — publisher, conference
article article (OCR)
Geschäumte Metalle als neue Leichtbauwerkstoffe
Werkstofftag '93, 8-9 March 1993, München, Germany
VDI-Verlag Düsseldorf, VDI-Berichte 1021, 277–284 (1993)
ISBN 3-18-091021-6 — doi: — web of science — publisher, conference
article article (OCR)
Powder metallurgical technology and mechanical properties of metallic foams
International Symposium on Advanced Materials for Lightweight Structures, 25-27 March 1992, Noordwijk, Netherlands
in "Advanced materials for lightweight structures", Editor: E.A. Burke, ESTEC/ESA Publishing Division, Noordwijk, ESA Special Publications SP-336, 351–353 (1992)
ISBN 92-9092-186-2 — doi: — web of science — publisher, conference (TOC)
article article (OCR)